This machine works on the Constant Rate of Traverse (CRT) principle. The sample is held between two jaws; the upper jaw is stationary while the lower end moves at a known fixed speed via a motor, gearbox and lead-screw arrangement. The load applied on the stationary jaw is sensed by a load cell, which displays the load digitally in newtons and kilograms. Genuine software and an RS-232 port connect it to a PC.

Technical details:
· Load-frame capacity: 30, 50, 100, 250, 500, 1000 kg
· Load-cell capacity: 30 kg to 1000 kg
· Display: LCD for manual use / RS-232 port to PC
· Max. crosshead travel (excluding grip): 950 mm
· Max. working width: 350 mm
· No. of lead screws: 1
· Load measurement: by load cell
· Speeds: standard 2-speed 100 / 300 mm/min; optional AC variable-speed drive 1 to 500 mm/min
· Elongation measurement: digital encoder/sensor, 1 mm resolution (optional 1 m scale, L.C. 0.01 mm / 0.1 mm)
· Load accuracy: ±1%
· Grip (tensile test): screw grip
· Overall dimensions (L x D x H): approx. 775 x 525 x 1825 mm
· Approx. weight: 140 kg
· Supply voltage: standard machine; AC variable-speed drive machine 3-phase 415 V, 0.25 HP / single phase

We are manufacturers and suppliers of the Computerized Tensile Testing Machine, serving Algeria, Argentina, Australia, Bahrain, Bangladesh, Belgium, Bhutan, Brazil, Cambodia, Cuba, Cyprus, Denmark, Ecuador, Egypt, Ethiopia, Finland, France, Georgia, Germany, Ghana, Hungary, Iceland, Italy, Japan, Jordan, Kenya, Kuwait, Malaysia, the Philippines, Tanzania and Uganda.