Accessories for the single-stage and double-stage vacuum pump:
1. Pump trolley with trap: this provides a convenient mobile vacuum source with particular attention to safety and ease of use. Construction: the metal frame and panel are finished with a thick layer of epoxy-based polyester paint, which gives a strong, highly scratch- and chemical-resistant surface. The panel is fitted with a mains indicator lamp, an on-off pump switch, and a vacuum gauge with vacuum control valve. A thick-wall borosilicate-glass double vapour trap is provided between the vacuum source and the vessel to be evacuated. A thick rubber mat is provided on the vacuum-pump shelf to absorb vibration and noise, and heavy castor wheels are fitted on the bottom for easy mobility. In use, the vapour trap is filled with a few lumps of solid silica gel.
2. Vacuum gauge with regulator.
3. Vacuum gauge with regulator and non-return valve combined.
4. Moisture trap with a non-return valve and vacuum gauge with regulator combined.
5. Vacustat without mercury, range 10 mm to 0.001 mm/Hg pressure.
6. Vacustat with mercury.
7. V-belt.
8. Oil seals.

We are manufacturers and suppliers of Accessories for the Single-Stage and Double-Stage Vacuum Pump, serving Algeria, Argentina, Australia, Bahrain, Bangladesh, Belgium, Bhutan, Brazil, Cambodia, Cuba, Cyprus, Denmark, Ecuador, Egypt, Ethiopia, Finland, France, Georgia, Germany, Ghana, Hungary, Iceland, Italy, Japan, Jordan, Kenya, Kuwait, Malaysia, the Philippines, Tanzania and Uganda.