Technical Educational Equipment

Claw Clutch: properly constructed model, one part having sliding groove; complete on base with operating lever.

Subsonic Wind Tunnel: this type of tunnel are used for various operations at very low mach number; the speed limit for thsi is 480 km/h.

Pipe Surge and Water Hammer Apparatus: this device helps to determine the difference between phenomena of pipe surge and water hammer; it also determines…

Pipe Network Apparatus: specifically designed to allow the setting up of a wide range of different pipe arrays (networks)

Portable, self-contained dead weight precision pressure gauge calibrator. Calibrates gauges 1-300 bar range to ±0.015% of reading.

Basic Metacentric Height: rectangular floating pontoon with mast; variable centre of gravity via movable weights (transverse and vertical) Clinometer…

Bernoulli's Theorem Demonstration: venturi section machined from clear acrylic; seven static pressure tappings plus a total head measurement; flow control…

Osborne Reynold 's Demonstration; the device can determine laminar, transitional and fully turbulent pipe flows.

Series Parallel Pump: fixed speed pump with similar performance characteristics to pump in Hydraulics Bench; mounted on floor standing plinth with ON/OFF…

A small scale apparatus designed to demonstrate Cavitation using an Hydraulics Bench.

Pitot tube with scale to determine the position within the pipe diameter; includes pressurised water manometer with scale length 500mm.

Ships Vibration Test Model: apparatus designed to enable students to investigate a simple model hull form for resonance phenomena.

Ships Stability Apparatus: apparatus designed to enable students to study ship hydrostatics and stability.

Hydraulic Flow Demonstrator: in this device, clear acrylic is used for visibility and is supported by a floor-standing, metal frame fitted with castors for…

It is a centrifugal pump which is mounted on stainless steel plinth; also having a water reservoir and pipework for continuous circulation.

A small-scale centrifugal fan demonstration unit, comprising of an inlet duct, the fan, an outlet duct and an adjustable aperture, all mounted on a stainless…

It is a bench top unit having a small scale axial fan and all other required connected equipment.

Centrifugal Compressor Demonstration Unit: it is used for high-pressure deliveries of gas flows or suction duties; it is a small-scale multi-stage…

A small-scale gear pump demonstration unit, comprising of a water reservoir, pump, control valve, relief valve and inter- connecting pipework, all mounted on…

Impulse Turbine Demonstration Unit: small scale hydropower unit designed to demonstrate the operating principles of an impulse turbine.

Computer Compatible Manometer Bank: electronic multiple channel pressure measurement system designed to replace liquid manometer banks.

A self-contained river flow simulator for the study and visualisation of river formations, bedload studies and fluvial geomorphology.

Glass Sided Tilting Flume: width: 300 mm Depth: 450 mm Length: As ordered (multiples of 2.5m) Note: overall length is 3.25m longer than the working section…

Advanced Hydrology Study System: A self contained floor standing apparatus for hydrology and fluvial geomorphology demonstrations, comprising.